 Add to Shopping Cart £43.05 (£49.51 inc VAT)
Availability: Low
|
| Crucial 2GB (1 GB x 2) Ballistix Tracer 240-pin DIMM (with LEDs), DDR2 PC2-8500 Memory Module |
|
|
A Ballistix Tracer dual inline memory module (DIMM) consists of a number of memory components that are attached to a black printed circuit board. The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
Ballistix Tracer 240-pin DIMMs are used to provide DDR2 SDRAM memory for desktop computers. DDR2 is a leading-edge generation of memory with an improved architecture that allows it to transmit data very fast. Ballistix Tracer 240-pin DIMMs are available in DDR2 PC2-5300 (DDR2 667) SDRAM, DDR2 PC2-6400 (DDR2 800), and DDR2 PC2-8500 (DDR2 1066).
To use DDR2 memory, your system motherboard must have 240-pin DIMM slots and a DDR2-enabled chipset. A DDR2 SDRAM DIMM will not fit into a standard SDRAM DIMM socket or a DDR DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.)
The number of black components on a Ballistix Tracer 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. Ballistix 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins. The notch in a 240-pin DDR2 DIMM is closer toward the center of the module.
|
|
|
| Ref |
CRU/MEM/366 |
| Manufacturer Code |
 |
|
Technical Specifications
|
Module Size:
2GB kit (1GBx2)
Package:
Ballistix Tracer 240-pin DIMM (with LEDs)
Feature:
DDR2 PC2-8500
Specs:
DDR2 PC2-8500
5-5-5-15
UNBUFFERED
NON-ECC
DDR2-1066
2.2V
128Meg x 64
|
|
| More products like this: |
Memory -> DDR2 '240-pin' Memory -> 2GB and above DDR2 Memory |
